Worm gear drive type WH-WHNS
1. Type
2. Torque
3. Speed
4. Limit range
5. Motor power
6. Voltage
7. Frequency
8. Amperage
9. Fusing
10. Rating
11. Protection
12. Weight
13. Noise level in dB(A)
14. Weight of the gate
15. Chain wheel
16. Speed
17. Limit rang (larger limit range upon request)
(limit switch for longer lengths on request)
18. Pushing power
19. Control voltage
20. Mounting plate and protection hood
21. Initial lifting speed 20% friction included
22. Dimension of gate
23. Opening time
24. Width of wing max
25. Opening angle
26. Transformer
27. Dimensions and design subject to modifications
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Nm | Min-1 | U | kW | V | Hz | A | A | ED | IP | Kg | dB(A) |
WH – R 35 | 73 | 19 | 33 | 0,25 | 230/400 | 50 | 1,5/0,9 | 4/2 | S1-100 | 44 | 32 | < 70 |
WH - R 50 | 109 | 19 | 33 | 0,37 | 230/400 | 50 | 2,2/1,3 | 4/2 | S1-100 | 44 | 34 | < 70 |
WHN - R 75 | 132 | 24 | 33 | 0,55 | 230/400 | 50 | 2,5/1,4 | 4/4 | S1-100 | 44 | 41 | < 70 |
WHN - R 150 | 259 | 24 | 33 | 1,10 | 230/400 | 50 | 5,4/3,1 | 10/6 | S1-100 | 44 | 44 | < 70 |
WHNV - R 200 | 341 | 25 | 33 | 1,50 | 230/400 | 50 | 6,9/4,0 | 10/6 | S1-100 | 44 | 76 | < 70 |
WHNV - R 300 | 500 | 25 | 33 | 2,20 | 230/400 | 50 | 9,5/5,5 | 16/10 | S1-100 | 44 | 80 | < 70 |
(2) Roll-up speed*
The armour weights given in the tensile force tables already take into account 20% friction and the first rotation.
Operator for sliding gates WH-R – WHNV-R
1. Type
2. Torque
3. Speed
4. Limit range
5. Motor power
6. Voltage
7. Frequency
8. Amperage
9. Fusing
10. Rating
11. Protection
12. Weight
13. Noise level in dB(A)
14. Weight of the gate
15. Chain wheel
16. Speed
17. Limit rang (larger limit range upon request)
(limit switch for longer lengths on request)
18. Pushing power
19. Control voltage
20. Mounting plate and protection hood
21. Initial lifting speed 20% friction included
22. Dimension of gate
23. Opening time
24. Width of wing max
25. Opening angle
26. Transformer
27. Dimensions and design subject to modifications
1 | 14 | 15 | 16 | 17 | 18 |
---|---|---|---|---|---|
Type | Kg | Kettingwiel | cm / sec | m | N |
WH – R 35 | 400 | Z 25, ¾” | 15 | 15,75 | 921 |
WH - R 50 | 600 | Z 25, ¾” | 15 | 15,75 | 1315 |
WHN - R 75 | 800 | Z 25, ¾” | 19 | 15,75 | 1710 |
WHN - R 150 | 1600 | Z 25, ¾” | 19 | 15,75 | 3421 |
WHNV - R 200 | 2000 | Z 19, 1” | 20 | 16,00 | 4415 |
WHNV - R 300 | 3000 | Z 19, 1” | 20 | 16,00 | 6493 |
Z = teeth
Operator for sliding gates WH-R
Operator for sliding gates WH-R